Mobile QR Code QR CODE

“JSTS has been indexed and abstracted in the SCIE (Science Citation Index Expanded) since Volume 9, Issue 1 in 2009. Furthermore, it continues to maintain its listing in the SCOPUS database and is recognized as a regular journal by the Korea Research Foundation.

※ The user interface design of www.jsts.org has been recently revised and updated. Please contact inter@theieie.org for any inquiries regarding paper submission.

Journal Search

  1. Home
  2. Archive
  3. 2019-12 (Vol.19 No.06)
  4. 10.5573/JSTS.2019.19.6.600
XML PDF INFO REF

REFERENCES

1 
Wu G., Han B., Cheam D. D., Wai L. C., Chang P. H. K., Singh N., et al. , 2019, Development of Six-Degree-of-Freedom Inertial Sensors With an 8-in Advanced MEMS Fabrication Platform, IEEE Transactions on Industrial Electronics, Vol. 66, pp. 3835-3842DOI
2 
Nasiri S., Winkler S., Ramadoss R., 2018, Nasiri Fabrication Process for Low-Cost Motion Sensors in the Consumer Market, Mems Packaging, Vol. 5, pp. 73Google Search
3 
Perlmutter M., Robin L., 2012, High-performance, low cost inertial MEMS: A market in motion!, in Proceedings of the 2012 IEEE/ION Position, Location and Navigation Symposium, pp. 225-229DOI
4 
Zhanshe G., Fucheng C., Boyu L., Le C., Chao L., Ke S., 2015, Research development of silicon MEMS gyroscopes: a review, Microsystem Technologies, Vol. 21, pp. 2053-2066DOI
5 
Iqbal F., Din H., Lee B., 2019, Single Drive Multi-Axis Gyroscope with High Dynamic Range, High Linearity and Wide Bandwidth, Micromachines, Vol. 10, pp. 410DOI
6 
Shoaib M., Hamid N. H., Malik A. F., Ali Z., Basheer N., Tariq Jan M., 2016, A review on key issues and challenges in devices level MEMS testing, Journal of Sensors, Vol. 2016DOI
7 
Wilson L., 2013, International technology roadmap for semiconductors (ITRS), Semiconductor Industry Association, Vol. 1Google Search
8 
Iqbal F., Lee B., 2018, A Study on Measurement Variations in Resonant Characteristics of Electrostatically Actuated MEMS Resonators, Micromachines, Vol. 9, pp. 173DOI
9 
Sisto A., Schwarzelbach O., Fanucci L., 2013, Fully electrical test procedure for inertial MEMS characterization at wafer-level, in Proceedings of the 2013 9th Conference on Ph. D. Research in Microelectronics and Electronics (PRIME), pp. 121-124DOI
10 
Chen Y., Zhang Z., Shen Y., Li K., 2017, Wafer-level test system using a physical stimulus for a MEMS accelerometer, in 2017 IEEE International Conference on Real-time Computing and Robotics (RCAR), pp. 145-150DOI
11 
Brasca L. M. C., Bernardi P., Reorda M. S., Barbieri D., Bonaria L., Losco R., et al. , 2011, A parallel tester architecture for accelerometer and gyroscope MEMS calibration and test, Journal of Electronic Testing, Vol. 27, pp. 389-402DOI
12 
Board I., 1998, IEEE standard specification format guide and test procedure for single-axis interferometric fiber optic gyros, IEEE Std, pp. 952-1997Google Search
13 
Microelectronics S., 2016, Microelectronics, Available: https://www.st.comGoogle Search
14 
Guerinoni L., Falorni L. G., Gattere G., Modelling Cross Axis Sensitivity in MEMS Coriolis Vibratory Gyroscopes, in Multidis-ciplinary Digital Publishing Institute Proceedings, pp. 281DOI
15 
Shah M. A., Iqbal F., Lee B.-L., 2015, Simulation of a dual axis MEMS seismometer for building monitoring system, in Proceedings of the COMSOL ConferenceGoogle Search
16 
Prandi L., Caminada C., Coronato L., Cazzaniga G., Biganzoli F., Antonello R., et al. , 2011, A low-power 3-axis digital-output MEMS gyroscope with single drive and multiplexed angular rate readout, in 2011 IEEE International Solid-State Circuits Conference, pp. 104-106DOI