Mobile QR Code QR CODE

“JSTS has been indexed and abstracted in the SCIE (Science Citation Index Expanded) since Volume 9, Issue 1 in 2009. Furthermore, it continues to maintain its listing in the SCOPUS database and is recognized as a regular journal by the Korea Research Foundation.

※ The user interface design of www.jsts.org has been recently revised and updated. Please contact inter@theieie.org for any inquiries regarding paper submission.

Journal Search

  1. Home
  2. Archive
  3. 2024-08 (Vol.24 No.04)
  4. 10.5573/JSTS.2024.24.4.289
XML PDF INFO REF

References

1 
Lin, Qiuyang, et al. "Photoplethysmography (PPG) Sensor Circuit Design Techniques", IEEE Custom Integrated Circuits Conference (CICC), pp. 01-08, 2022.DOI
2 
Swathi, Payavula, and M. Bhaskar. "A PVT Invariant Cascode Current Reference Circuit in 180nm CMOS Process", IEEE International Conference on Semiconductor Electronics (ICSE), pp. 113-116, 2022.DOI
3 
S. Lee, H. Shin and C. Hahm, "Effective PPG sensor placement for reflected red and green light and infrared wristband-type photoplethys-mography", Proc. 18th Int. Conf. Adv. Commun. Technol. (ICACT), pp. 556-558, 2016.DOI
4 
J. Lee, K. Matsumura, K. I. Yamakoshi, P. Rolfe, S. Tanaka and T. Yamakoshi, "Comparison between red, green and blue light reflection photoplethysmography for heart rate monitoring during motion", Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 1724-1727, 2013.DOI
5 
W. Saadeh, T. Tekeste and M. H. Perrott, "A > 89% efficient LED driver with 0.5V supply voltage for applications requiring low average current", IEEE Asian Solid-State Circuits Conference (A-SSCC), pp. 273-276, 2013.DOI
6 
M. Tavakoli, L. Turicchia, and R. Sarpeshkar, “An ultra-low-power pulse oximeter implemented with an energy-efficient transimpedance amplifier,” IEEE Trans. Biomed. Circuits Syst., vol. 4, no. 1, pp. 27-38, Feb. 2010.DOI
7 
D. Jang and S. Cho, “A 43.4 µW photoplethys-mogram-based heart-rate sensor using heart-beat-locked loop,” in Proc. IEEE Int. Solid - State Circuits Conf., 2018, pp. 474-476.DOI
8 
A. Caizzone, A. Boukhayma and C. Enz, “17.8 A 2.6µW Monolithic CMOS photoplethysmographic sensor operating with 2µW LED power,” in Proc. IEEE Int. Solid- State Circuits Conf., 2019, pp. 290-291.DOI
9 
M. Konijnenburg et al., “A multi(bio)sensor acquisition system with integrated processor, power management, 8 × 8 LED drivers, and simul-taneously synchronized ECG, BIO-Z, GSR, and two PPG readouts,” IEEE J. Solid-State Circuits, vol. 51, no. 11, pp. 2584-2595, Nov. 2016.DOI
10 
T. Y. Man, P. K. T. Mok and M. J. Chan, "A 0.9-V input discontinuous-conduction-mode boost converter with CMOS-control rectifier", IEEE J. Solid-State Circuits, vol. 43, no. 9, pp. 2036-2046, Sep. 2008.DOI
11 
R. W. Erickson and D. Maksimović, Fundamentals of Power Electronics, Boston, MA, USA:Springer, 2001.URL
12 
V. Kratyuk et al., “A design procedure for all-digital phase-locked loops based on a charge-pump phase-locked-loop analogy,” IEEE Trans. Circuits Syst. II, vol. 54, no. 3, Mar. 2007.DOI
13 
Y. Wang, J. M. Alonso, and X. Ruan, “A review of LED drivers and related technologies,” IEEE Trans. Ind. Electron., vol. 64, no. 7, pp. 5754-5765, Jul. 2017.DOI
14 
A. P. Ramesh and I. J. Kumar, “Implementation of Integer Square Root,” Int. J. Eng. Sci. Innov. Technol., vol. 4, no. 1, pp. 105-113, 2015.URL
15 
Q. Lin et al., “A 119dB dynamic range charge counting light-todigital converter for wearable PPG/NIRS monitoring applications,” IEEE Trans. Biomed. Circuits Syst., vol. 14, no. 4, pp. 800-810, Aug. 2020.DOI
16 
F. Marefat, R. Erfani, and P. Mohseni, “A 1-V 8.1-μ w PPG-recording front-end with >92-dB DR using light-to-digital conversion with signal-aware DC subtraction and ambient light removal,” IEEE Solid-State Circuits Lett., vol. 3, no. pp. 17-20, Dec. 2020.DOI
17 
A. Sharma et al., “Multi-modal smart bio-sensing SoC platform with >80dB SNR 35µA PPG RX chain,” in Proc. IEEE Symp. VLSI Circuits, 2016, pp. 1-2.DOI
18 
S. Hong, J. Han, D. H. Kim, and O.K. Kwon, “A double-loop control LED backlight driver IC for medium-sized LCDs," ISSCC Dig. Tech Papers, Feb 2010.DOI
19 
S. Rao, Q. Khan, S. Bang, D. Swank, A. Rao, W. McIntyre, and P.K. Hanumolu, “A 1.2A buck-boost LED driver with 13% efficiency improvement using error-averaged Sense FET-based current sensing,” ISSCC Dig. Tech Papers, Feb 2011.DOI