Mobile QR Code QR CODE


Iqbal F., Din H., Lee B., 2019, Single Drive Multi-Axis Gyroscope with High Dynamic Range, High Linearity and Wide Bandwidth, Micromachines, Vol. 10DOI
Iqbal F., Shah M. A., Lee B., 2017, Analysis of parasitic feed-through capacitance in MEMS gyroscope with push pull configuration, IEEE 12th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), pp. 414-417DOI
Walther A., Le Blanc C., Delorme N., Deimerly Y., Anciant R., Willemin J., 2012, Bias contributions in a MEMS tuning fork gyroscope, Journal of microelectromechanical systems, Vol. 22, No. 22, pp. 303-308DOI
Iqbal F., Lee B., 2018, A Study on Measurement Variations in Resonant Characteristics of Electrostatically Actuated MEMS Resonators, Micromachines, p. 173, Vol. 9DOI
Roessig T.-A. W., 1999, Integrated MEMS tuning fork oscillators for sensor applications, 1999.Google Search
Zotov S. A., Simon B. R., Prikhodko I. P., Trusov A. A., Shkel A. M., 2014, Quality factor maximization through dynamic balancing of tuning fork resonator, IEEE Sensors Journal, Vol. 14, pp. 2706-2714DOI
Janioud P., Koumela A., Poulain C., Rey P., Berthelot A., Morfouli P., 2017, Tuning the Anti-Phase Mode Sensitivity to Vibrations of a MEMS Gyroscope, in Multidisciplinary Digital Publishing Institute Proceedings, p. 355DOI
Azgin K., Temiz Y., Akin T., 2007, An SOI-MEMS tuning fork gyroscope with linearly coupled drive mechanism, IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS), Vol. , No. , pp. 607-610DOI
Gao Y., Li H., Huang L., Sun H., 2017, A lever coupling mechanism in dual-mass micro-gyroscopes for improving the shock resistance along the driving direction, Sensors, p. 995, Vol. 17DOI
Thakur P. S., Sugano K., Tsuchiya T., Tabata O., 2014, Experimental verification of frequency decoupling effect on acceleration sensitivity in tuning fork gyroscopes using in-plane coupled resonators, Microsystem technologies, Vol. 20, pp. 403-411DOI
Yoon S. W., Lee S., Najafi K., 2012, Vibration-induced errors in MEMS tuning fork gyroscopes, Sensors and Actuators A: Physical, Vol. 180, pp. 32-44DOI
Koumela A., Poulain C., Le Goc C., Verdot T., Joet L., Rey P., 2016, Resilience to vibration of a tuning fork MEMS gyroscope, Procedia Engineering, Vol. 168, pp. 1725-1730DOI
Guan Y., Gao S., Liu H., Niu; S., 2015, Acceleration sensitivity of tuning fork gyroscopes: Theoretical model, simulation and experimental verification, Microsystem Technologies, Vol. 21, pp. 1313-1323DOI
Giacci F., Dellea S., Langfelder; G., 2017, Signal integrity in capacitive and piezoresistive single-and multi-axis MEMS gyroscopes under vibrations, Microelectronics Reliability, Vol. 75, pp. 59-68DOI
Singh T. P., Sugano K., Tsuchiya T., Tabata; O., 2012, Frequency response of in-plane coupled resonators for investigating the acceleration sensitivity of MEMS tuning fork gyroscopes, Microsystem technologies, Vol. 18, pp. 797-803DOI
Trusov A., Schofield A., Shkel A., 2009, Gyroscope architecture with structurally forced anti-phase drive-mode and linearly coupled anti-phase sense-mode, in TRANSDUCERS 2009-2009 Inter-national Solid-State Sensors, Actuators and Microsystems Conference, pp. 660-663DOI
Trusov A. A., Schofield A. R., Shkel; A. M., 2011, Micromachined rate gyroscope architecture with ultra-high quality factor and improved mode ordering, Sensors and Actuators A: Physical, Vol. 165, pp. 26-34DOI
Din H., Iqbal F., Lee; B., 2020, Modelling and optimization of single drive 3-axis MEMS gyroscope, Microsystem Technologies, pp. 1-9DOI
Guan Y., Gao S., Liu H., Jin L., Niu; S., 2016, Design and vibration sensitivity analysis of a MEMS tuning fork gyroscope with an anchored diamond coupling mechanism, Sensors, p. 468, Vol. 16DOI
Guan Y., Gao S., Jin L., Cao; L., 2016, Design and vibration sensitivity of a MEMS tuning fork gyroscope with anchored coupling mechanism, Microsystem Technologies, Vol. 22, pp. 247-254DOI
Sharma A., Zaman F. M., Amini B. V., Ayazi; F., 2004, A high-Q in-plane SOI tuning fork gyroscope, in SENSORS, IEEE, Vol. 2004 ieee, pp. 467-470DOI
Trinh T. Q., Nguyen L. Q., Dao D. V., Chu H. M., Vu; H. N., 2014, Design and analysis of a z-axis tuning fork gyroscope with guided-mechanical coupling, Microsystem technologies, Vol. 20, pp. 281-289DOI
Xu Q., Hou Z., Kuang Y., Miao T., Ou F., Zhuo M., 2019, A tuning fork gyroscope with a polygon-shaped vibration beam, Micromachines, p. 813, Vol. 10DOI