Mobile QR Code QR CODE


Cohen B., Hessels A., Kelly A., Chen L., Larson E., 2019, Impact of Exposures and Outbreaks on Staff Nurse and Infection Preventionist Workload, Am. J. Infect. Control, Vol. 47, No. 6, pp. s7DOI
Liu B., Wang L., Liu M., 2019, Lifelong federated reinforcement learning: a learning architecture for navigation in cloud robotic systems, IEEE Robot. Autom. Lett., Vol. 4, No. 4, pp. 4555-4562DOI
Kiihamaki J., Dekker J., Pekko P., 2004, ‘Plug-up’—a new concept for fabricating SOI MEMS devices, Microsyst. Technol., Vol. 10, No. 5, pp. 346-350DOI
Savoia A. S., Caliano G., Pappalardo M., 2012, A CMUT probe for medical ultrasonography: From microfabrication to system integration, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, Vol. 59, No. 6, pp. 1127-1138DOI
Khanghah M. M., Sadeghipour K. D., 2014, A 0.5 V offset cancelled latch comparator in standard 0.18 um CMOS process, Analog Integr. Circuits Signal Process., Vol. 79, No. 1DOI
Zhang R., Ren Z., Yu S., 2008, Loss-Reduction in Flexibly Vertical Coupled Ring Lasers Through Asymmetric Double Shallow Ridge and ICP / ICP Cascade Etching, Vol. 20, No. 22, pp. 1821-1823DOI
Zhang Y., Zhu Q. S., Itoh T., Maeda R., Toda \A., 2013, High-resolution wet etching technology of thick electroless nickel alloy film for MEMS devices and packaging, Proc.2013 14th Int. Conf. Electron. Packag. Technol. ICEPT 2013, pp. 396-399DOI
Arora S., Arora A., George P. J., 2012, Design of MEMS based microcantilever using comsol multihysics, Int. J. Appl. Eng. Res., Vol. 7, No. 11, pp. 1-3Google Search
Degertekin F. L., 2013, Harmonic cmut devices and fabrication methods., J. Acoust. Soc. Am., Vol. 130, No. 3, pp. 1781Google Search
Zhou W., Xu P., 2013, Theoretical investigation on the dynamic performance of CMUT for design optimization, Acta Mech. Solida Sin., No. 1, pp. 99-110DOI