Mobile QR Code QR CODE

REFERENCES

1 
Brunner T. A., 2007, Impact of overlay metrology errors on overlay control strategies, Proc. of SPIE, Vol. 6518, pp. 65180F-1-65180F-12URL
2 
Thomas A. D., Soni K., Nithyanadan K., 2025, Physics based phase control in coherent beam combining systems, Journal of Lightwave Technology, Vol. 43, No. 2, pp. 824-831DOI
3 
Zhao K., Gao S., Li H., Ma J., Teng Y., Cao K., 2021, Effectiveness of partial discharge test in detecting micro-defects of insulators in GIS, Proc. of 2021 IEEE 4th International Conference on Renewable Energy and Power Engineering (REPE), pp. 97-102DOI
4 
Lee S. K., Ma S.-M., Seo I., Shin H. S., Kim H. S., Cross A., 2014, Investigation of novel inspection capability for 3D NAND device wordline inspection, Proc. of 25th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2014), pp. 140-143DOI
5 
Wang K., Zhang S., Pi L., Shi Z., Zhang S., Yu X., 2023, Investigating the impact of probe geometry characteristics on the Ra in the international metrology comparison of surface roughness, Proc. of 2023 2nd International Conference on Optical Imaging and Measurement (ICOIM)DOI
6 
Nguyen H. G., Meiners M., Schmidt L., Franke J., 2020, Deep learning-based automated optical inspection system for crimp connections, Proc. of 2020 10th International Electric Drives Production Conference (EDPC), pp. 1-6DOI
7 
2017, High Power Laser-Sustained Plasma Light Sources for KLA-Tencor Optical Inspection Systems, EUV Litho Conf.URL
8 
Rumiantsev A., 2019, On-Wafer Calibration Techniques Enabling Accurate Characterization of High-Performance Silicon Devices at the mm-Wave Range and Beyond, pp. 45-48URL
9 
Sakamaki R., Horibe M., 2019, Probe positioner and probe tip calibration for traceable on-wafer measurement, Proc. of 2019 92nd ARFTG Microwave Measurement Conference (ARFTG), pp. 1-4DOI
10 
Klarák J., Andok R., Hricko J., Klacková I., Tsai H.-Y., 2022, Design of the automated calibration process for an experimental laser inspection stand, Sensors, Vol. 22, No. 14, pp. 5306DOI
11 
Zhang Y., Zhang Y., Liu W., 2023, Analysis, simulation, and scanning geometry calibration of palmer scanning in airborne hyperspectral LiDAR, Remote Sensing, Vol. 17, No. 8, pp. 1450DOI
12 
Fravolini M. L., Brunori V., Campa G., Napolitano M. R., La Cava M., 2005, Structural analysis approach for the generation of structured residuals for aircraft FDI, Aerospace and Electronic Systems Magazine, Vol. 20, No. 5, pp. 3-8URL
13 
Lechien T., Dehaerne E., Dey B., Blanco V., Halder S., de Gendt S., Meert W., 2023, Automated semiconductor defect inspection in scanning electron microscope images: a systematic review, arXiv preprint arXiv:2308.08376DOI
14 
Dick W. D., Hegner L. A., Li L., 2023, 10nm particle deposition capability for qualification of next-generation defect inspection tools, Proc. of 2023 34th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC), pp. 1-6DOI
15 
Dark Field Wafer Defect Inspection System DI4600, Product pageURL
16 
2023, TDI Primer--High Sensitivity Line Scanning, Technical primerURL
17 
Defect Inspection and Review—Patterned/Unpatterned Wafer Defect Inspection & Review Systems, Product pageURL
18 
Auto-Load 20 nm Particle Deposition System 2300G3A, Product pageURL
19 
2024, Hitachi High-Tech Launches Wafer Surface Inspection System LS9300AD for Wafer Manufacturers, News release (PDF)URL
20 
Getreuer P., 2011, Linear methods for image interpolation, Image Processing On Line (IPOL)URL
21 
2010, Root Mean Square Error, NIST ITL Dataplot ReferenceURL